PP melt blown filter element uses polypropylene (PP) thermal spray fiber as the filter medium, which is an advanced fixed layer filter element. The nominal filtering accuracy can range from 1um-100um. The filter element is affected by the fluctuation of the feed pressure, and has the characteristics of pressure difference, high flux, good filtration accuracy and low economic cost. It is welcomed by users.

Advantages of melt blown filter element:

1. Filtration efficiency and filtration accuracy, uniform filter pore density. The filtration efficiency is over 99%.

2. The filter resistance is small, the filter flow is large, the dirt holding capacity is large, and the service life is long. The fiber diameter and gap of this product are adjustable during the production process. The inner layer of the filter element has small micropores and the outer layer is large, which increases the flow and pollution holding capacity. .The filter element is not easy to block. Extended service life.

3. It has high cleanliness, no pollution to water, acid and alkali resistance, organic solvents and corrosion.

4. High strength, the filter element will not be deformed when the water pressure difference between the inlet and outlet of the filter exceeds 0.4Mpa, and the filtration efficiency will not decrease when the temperature exceeds 90°C.

5. This product has extremely high hydrophilicity after treatment and modification of polypropylene, and can absorb ten times the weight of water, so it can be used for oil-water separation.

If you need to buy PP melt blown filter element, please look for D.king filter element. 100% quality assurance, China's well-known filter element brand, you can use it more at ease!